Description

O&B SSM9X 9-Channel Amplifier

SSM 9X

9 Channel Power Amplifier For Home Theater

The SSM 9X is our flagship 9-channel power amplifier, meticulously engineered to deliver exceptional clarity, headroom, and control for high-performance home theater systems. It delivers a robust 400 watts per channel at 4Ω for the front Left, Center, and Right (LCR) channels—ensuring dynamic, distortion-free reproduction where it matters most. The remaining four surround channels are powered at a solid 150 watts per channel at 4Ω, striking the perfect balance between immersive surround detail and overall system efficiency.

Available in Options:

Silver anodised faceplate
Black anodised faceplate

Product Specifications

Power Output:	400W X 3 and 150W X 6 at 4ohms
Frequency Response:	20hz – 50khz (±0.5db)
SNR:	> 108dBr(A-weighted) (±2db)
THD+N:	< 0.05% (-3dB)
Dimensions:	17” wide x 10.5” high x 22” deep (not including connectors and feet).
Weight:	116 LBS / 53 Kgs (unboxed)

SSM 9X – MULTICHANNEL AMPLIFIER

Topology Class- AB
Channels 9
Configuration 3 X 400W + 6 X 150 W

High power output (RMS)
8Ω 4Ω
1 Channel Driven 270W 500W
2 Channels Driven 260W 450W
3 Channels Driven 250W 400W

Medium power output (RMS)
8Ω 4Ω
1 Channel Driven 140W 240W
2 Channels Driven 120W 219W
All medium Channels Driven 100W 150W
Peak Current Delivery – high power
channels

50A 1 Ω /1ms

Peak Current Delivery – Medium
power channels

25A 1 Ω /1ms

Signal to Noise Ratio > 108dBr(A-weighted) (±2db)
Frequency Response 20hz – 50khz (±0.5db)
THD+N. 8Ω. 1kHz < 0.05% (-3dB)
Minimum Recommended Load
Impedance (per channel)

4 Ω (which equals one 4Ω load or two paralleled 8Ω loads).
Damping Factor (8 Ohm load) >=600(High Power Channels) >= 200(Medium Power Channels
Input Sensitivity 1.0 V for RCA and 1.8 for XLR
Gain RCA High power Channel- 32db and medium power Channel – 28db
Gain XLR High power Channel- 27db and medium power Channel – 23db
Input Impedance 33 KΩ
Source Selector A toggle switch is provided in back panel to select between RCA and XLR
Input Connections Unbalanced (RCA) & XLR one each per channel
Speaker Output Connections Audiophile grade 5-way binding posts.
Power Requirements 230 VAC @ 50 / 60 Hz
AC Power switch Ring LED LIGHT (switches AC main power)
Trigger 12V Trigger For amplifier Standby Feature, connector provided at back panel
Protection Protected against excessive operating temperature, shorted speaker connections,

ground faults.

Dimensions 17” wide x 10.5” high x 22” deep (not including connectors and feet).
Weight 116 LBS / 53 Kgs (unboxed)
Warranty 3 years (The Device will be serviced at Factory in Mumbai)